Elegoo EL-KIT-001 UNO R3 Project Complete Starter Kit with Tutorial for Arduino (63 Items) Asprie Vape Mod

buy now


This is the most complete kit for Arduino starters. It is very fun and easy to use. Kit is 100% compatible with all Arduino modules. The 63 parts are packaged in an attractive, convenient container. Component listing: 5pcs White LED 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs 22pf Ceramic Capacitor 5pcs 104 Ceramic Capacitor 2pcs Photoresistor 1pcs Thermistor 5pcs Diode Rectifier (1N4007) 2pcs Electrolytic Capacitor (10UF 50V) 2pcs Electrolytic Capacitor (100UF 50V) 5pcs NPN Transistor (PN2222) 5pcs NPN Transistor (S8050) 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 1pcs Sound Sensor Module 1pcs LCD1602 Module ( with pin header) 1pcs IC L293D 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs RTC Module 1pcs DHT11 Temperature and Humidity Module 2pcs Potentiometer 1pcs Rotary Encoder Module 1pcs Joystick Module 1pcs Keypad Module 1pcs 5V Relay 1pcs IR Receiver Module 1pcs UNO R3 Controller Board 1pcs Breadboard 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Prototype Expansion 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs HC-SR501 PIR Motion Sensor 1pcs Ultrasonic Sensor 1pcs GY-521 Module 1pcs 3V Servo Motor 1pcs MAX7219 Module 1pcs Remote 1pcs 9V 1A Power Supply 1pcs 65 Jumper Wire 1pcs Water Lever Sensor 1pcs USB Cable 1pcs 9V Battery with DC 1pcs RC522 RFID Module 10pcs Resistor (10R) 10pcs Resistor (100R) 30pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 20pcs Female-to-male Dupont Wire.

Diamondback Streetwise Vape Stun Gun Looks like a Vaporizer Electronic Cigarette but it is not. It has a built in Flashlight 19 million Rechargeable with FREE Survival Whistle (Pink) Asprie Vape Mod

buy now


World’s First Electronic Cigarette Stun Gun with FREE Survival Whistle. The Streetwise Vaporizer 19,000,000 Stun Flashlight is designed to look like a common Electronic Cigarette or “E-Cig”. It is only about 6.25 inches long but packs the power normally found in units twice its size. Even when test fired, the loud bright electrical burst is often enough to stop an attacker and if not a jolt from this unit certainly will. Note: not a real E-Cig. Protecting yourself is easy….just “VAPE and Escape” Features: •Discrete Protection: Designed to look like an Electronic Cigarette, this model enables you to catch your attacker off guard and gives you the element of surprise that is often needed to safety defend yourself •Easy to Carry and Conceal: At 6.25″ long and a diameter slightly larger than a quarter, this unit is easy to carry and conceal •Shock Proof Exterior: Military Grade aluminum alloy protects the unit from damage so it can always be ready to protect you •No Slip Grip: Etched ribbed handle ensures a firm grip •Blinding 1 Watt LED Light: Not only will the flashlight safely illuminate the entire area at night, but it can also help to protect you. When shined in the eyes of an attacker, the ultra-bright light can have a temporary blinding effect making it easy for you to immobilize them with the stun •Economically & Environmentally Friendly: The stun gun and flashlight are fully rechargeable and the light bulb has a life of up to 100,000 hours. •Safety Feature: In order to prevent accidental discharge a safety switch is on the side of the unit •Rechargeable: The included USB cord allows you to charge the Vaporizer using your computer or home outlet using the standard wall block (included) •Lifetime Warranty: Includes: •Streetwise Vaporizer Electronic Cigarette 19,000,000- Pink •USB Recharging cord •Instructions •Wall block

510 ohm meter vape station V3(included ohm reader)Black-Red Asprie Vape Mod

buy now


Vape station of 29 holes for organizing your mods,atomizers,tools,fluids and batteries Acrylic made with protective film and laser cutted The dimensions of the 510 ohm meter’s housing is 70mm x 50 mm(maximum) so as to fit the most popular 510 ohm meter device. There are not included tools,atomizers,mods,fluids,batteries and 510 ohm meter 510 ohmmeter with 2 AA batteries and 510 adaptor included.It needs assembling,10′ average time(included allen tool). Dimensions 35 cm width x 15 cm depth x 75 mm height It can accomodate and hole sizes are the following: 4 mods(25mm) 1 kanthal coil holder 2 mini screwdrivers 1 plier or tweezer 5 atomizers(25mm) 9 drip tips(9mm) 2 eliquids or 26650 batteries(30mm) 5 batteries 18500-18650(20 mm) 1 510 ohm meter housing for the most popular ohm meter in the market(70x 50 maximum) as in the picture 1× Meter Device 1× Connector Ohm Meter Volt Meter Accurate to +-0.4% Ohm: Measuring Range 0.01 ~ 9.99 Ohm Volt: Measuring Range 0.01 ~ 9.99 V Working Current: Less than 10 mAh with no tested object; less 30 mAh with tested object Standby Power Consumption: Less 10 uA YOU CAN FIND ASSEMBLING INSTRUCTIONS IN OUR SITE TUVAPES.COM IN THE DESCRIPTION OF EACH VAPE STAND IN PDF FILE YOU CAN FIND ALSO ACCESSORIES AND TOOLS FOR MODDERS

Vape Case Accessories, Vapor Pouch for Travel, Carrying Bag Holder to Carry Your Vape Box Mods Full Kit with Tank, Vaping Supplies Holster Organizer for e Juice, Battery, Black, Klouders [CASE ONLY] Asprie Vape Mod

buy now



Versatile Design – 4 comfy pockets in vape holster give you the ability to put your favorite vape accessories or phone and wallet in one organized place.
Rugged Protection – durable material of vape organizer carrying case designed to protect your vape and accessories from getting wet, scratching or knocks.
Safety for Accessories – heavy flap – to keep your accessories in secure, velcro on the flap designed for easy access and closure. Simplest way to secure your accessories from loosing.
Comfortable to Wear – strong belt loop with reinforced stitching created for attaching vape travel case on your belt. And wear it over your shoulder by using its small rings and buckle with an adjustable lanyard! Feel organized and comfy!
Perfect Gift – you can be proud to give this vape organizer as a gift. Beautifully designed packaging and free e-book makes this gift very impressive!

► vape accessory bag
► beautifully designed packaging
► exclusive Klouders e-Book
► designed manual card

If for any reason you’re not completely satisfied with the Klouders product, please let us know and we will send you a refund or free replace! Simply return vape accessory case within 30 days of delivery for a full refund. Don’t Miss Out!

Bag and set related items only, other things in the pictures are not included!

Do you need the best vape organizer to store your vape and its accessories? Klouders case for vape just what you are looking for. It can hold the largest of Box Mods
So, what are you waiting for?

Scroll back to the top of this page, Click [Add to Cart] and get vape carry bag NOW!

Wismec Reuleaux RX GEN3 300W CUP HOLDER by CushyMod [2948] cover wrap skin sleeve case car mod vape Asprie Vape Mod

buy now


Cushioned Mod Cup Holder by CushyMod

Please Note: This cup holder has been designed to fit the device listed in title only. It may fit other device’s, but this is not guaranteed. If you are looking for a cup holder that fits another device other then the one listed here, please contact us. We make CushyMod cup holders for most all devices on the market.

CushyMod Features:

Cushioned Interior
Super Soft Memory Foam
Protects device from wear and scratches
60MM deep means no falling out
Sized for use with or without a silicone sleeve

Tapered Fit Design
Made to fit all vehicles
Tapered from top to bottom

Tough Exterior
Impact Resistant ABS
Available in several colors

Other Details
Perfect for home & office use
Proudly made in the USA
Ready to use
In stock & ready to ship!

510-Thread USB Smart Charger with Over-Charge Protection, Compatible with Standard 510 Threaded Devices – 2 Pack Asprie Vape Mod

buy now


510-Thread USB Smart Charger


ONLY IN LIELONGREN, 45 Day Refund, 12-Month Worry-Free Warranty.
Professional After-Sales Team provides Free Life-time Technical Support.
You Can Apply for Service Support with Your Order ID at Any Time.

Input: 5V/500mA
Output: 4.2V/420mA

2 x 510-Thread USB Charger
1 x LIELONGREN Warranty Card